Gameboy DMG -01 White Backlight and bivert module mod kit - Plastic screen lens
£12.00
Skip to product information
High quality white backlight including polarizinig film, new plastic grey screen lens, kynar wire and bivert module for the Original Nintendo Game DMG-01. The backlight panel has a resistor already install as well as pre soldered wires for a convenient and easy install. These are ultra thin panels which makes modding a breeze.
Gameboy DMG -01 White Backlight and bivert module mod kit - Plastic screen lens
£12.00
Installation directions: -
- Dissasemble the gameboy, you will need a special tri wire screwdriver to open the case.
- Before installing the backlight panel you will need to carefully remove the reflective film rear of the lcd with a thin sharp knife , check YouTube for some excellent tutorials https://youtu.be/Xh-QZQUTt6Q.
- Place the backlight panel and polarizing film behind the LCD and solder the black (negative ) and white or red (positive) wires to the capacitor just below the LCD.
- The black wire goes to the right and the white or red wire to the left .
- The bivert module can be simply mounted to the rear of the mainboard and wired to the soldered points as in the picture.