FPGBC Kit FPGA powered DIY handheld games console - Game Boy Color - Original games GBC - Funnyplaying Kit

£11.00

Part FPGA Kit USB C - Black shell USB C - Atomic Purple Shell USB C - Royal Clear Blue Shell FPGA Kit - White USB C - White Shell USB C - Frosted clear Shell

The excellent FPGBC FPGA powered handheld by Funnplaying brings a new dimension to Gameboy Color and Original Gameboy gaming on a budget for gamers. You will need to add a custom shell with a USB C cut out and Gameboy Color buttons and silicon pads Compatible with all GBC and GB DMG games and with some modern upgrades. The sound is the best you will hear from the Gameboy Color and the display is a major improvement over the stock display. This kit is easy to install and can be assembled in less than 10 minutes.

FEATURES

Simulating real hardware using FPGA
Supports hardware cartridge
Features USB-C compatibility for easy firmware updates (only supported through Windows system）
Amazing high quality 2w speakers producing excellent sound with no hiss.
Compatible with some flash cards and compatible with other flash carts are updated with firmware revisions

INCLUDED

1 x FPGBC PCB HW ver 1.1
1 x Display panel with adapter ribbon
1 x 2w speaker
1 x 1600mAH battery

NOTES

Only supports lithium battery and charges through the usb c port,
Fast forward clock 1.25 speed
Firmware update are very straightforward -https://github.com/makhowastaken/GWGBC_FW

Please note: -

Please test before installing. Don't touch the back of the panel against the pin of the card slot when testing. This will cause damage to the panel and motherboard. Insulate this with either kapton or electrical tape Place the motherboard onto the back half of the shell. Place a piece of paper between the back of the screen and the motherboard so to insulate them both. Attach both the screen ribbon to the motherboard and attach the rechargeable battery. Slide the power switch